IFM電感式開關，德國易福門金屬傳感器[產品打印頁面]

]資料

IFM電感式開關，德國易福門金屬傳感器的詳細介紹

IFM電感式開關，德國易福門金屬傳感器，IG5907

金屬螺紋 M18 x 1
接插件
增長的感應距離
光調節輔助 (2 LED)
感應距離 12 mm; [nf] 非齊平安裝
電氣數據
電氣設計   DC PNP/NPN
工作電壓 [V] 10...36 DC; 符合cULus - Class 2標準
防護等級   II
反相保護   是
輸出
輸出功能   常開 / 常閉可選
電壓降 [V] < 4.6
小的負載電流 [mA] 4
漏電流 [mA] < 1
電流負載 [mA] 100
短路保護   脈沖
過載保護   是
開關頻率 [Hz] 300
監控范圍
感應距離 [mm] 12
實際感應距離 (Sr) [mm] 12 ± 10 %
工作距離 [mm] 0...9.7
精度/偏差
修正系數   鋼(St37) = 1 / 不銹鋼約0.7 / 黃銅約0.4 / Al 約 0.3 / Cu約0.2
遲滯 [Sr的百分比] 1...20
開關點偏移 [Sr的百分比] -10...10
環境條件
環境溫度 [°C] -25...70
外殼防護等級   IP 68; "冷卻潤滑劑"
機械技術數據
安裝   非齊平安裝
外殼材料   黃銅白青銅-鍍層; 感應面: PBT 桔黃色
顯示器/操作件
開關狀態顯示 LED 黃色(4 x 90°)
調整輔助 LED 紅色
電氣連接
接口   M12接插件; 鍍金觸點

IFM電感式開關，德國易福門金屬傳感器，IG5907

Function and features
This inductive sensor detects metals without contact and indicates their presence by
providing a switched signal.
The nominal sensing range (Sn) can be seen in the type designation on the type
label on the unit; operating distance (Sa) 0 ... 0,81 x Sn; (values based on standard
measurement with mild steel; a shorter sensing range for other metals).
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the indications
on the type label. The unit can be used as normally open ( ) or as normally
closed ( ).
Installation
Mounting by means of a mounting device.
Adjust the unit. Adjustment is correct
when the red LED does not light. Secure
by means of the nuts provided so that it
cannot work loose.
Non-flush installation.

Minimum distance when several sensors of the same type are mounted:
Operation
Check the safe functioning of the sensor. Display by LEDs:
The yellow LED is lit when the output is switched.
The red LED is lit in case of faulty adjustment.

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!