IFM光電開關，愛福門激光測距傳感器，O1D155
接插件
可見激光，激光等級1
4 位數字?jǐn)?shù)碼管顯示
測量范圍 0.3...6 m (參照白紙200 x 200 mm, 90 %反射)
背景消隱 > 6...100 m
電氣數據
電氣設計 DC PNP
工作電壓 [V] 18...30 DC
電流損耗 [mA] < 150
壽命 [h] 50000
光線種類 紅光 650 nm
防護等級 III
反相保護 是
輸出
輸出功能 OUT1: 常開/常閉可選
OUT2: 常開/常閉可選或模擬(4...20 mA / 0...10 V, 可設定量程)
電流負載 [mA] 2 x 200
短路保護 脈沖
過載保護 是
模擬量輸出
電流輸出 [mA] 4...20; 根據標準IEC 61131-2
- 負載值 [Ω] 250
電壓輸出 [V] 0...10; 根據標準IEC 61131-2
- 小的負載 [Ω] 5000
監控范圍
背景消隱 > 6...100 m
光斑直徑 [mm] < 8 x 8 ( 檢測距離 6 m )
測量/設定范圍
測量范圍 [m] 0.3...6 (參照白紙200 x 200 mm, 90 %反射)
測量頻率 [Hz] 1...33
環境條件
環境溫度 [°C] -10...60
外殼防護等級 IP 67
機械技術數據
外殼材料 外殼: 模壓鑄鋅; 窗口: 玻璃; LED窗口: 聚碳酸酯
顯示器/操作件
顯示 開關狀態 2 x LED 黃色
運行 LED 綠色
距離, 編程 4 位數字?jǐn)?shù)碼管顯示
電氣連接
接口 M12接插件
注釋 激光
激光等級1
IEC 60825-1 : 2007
除了偏差外，符合21 CFR 1040.10標準
參數 設定范圍 出廠設定
Uni mm, m, inch mm
OU1 Hno, Hnc, Fno, Fnc Hno
SP1 300...5999 1000
nSP1 300...5999 800
FSP1 300...5999 1200
OU2 Hno, Hnc, Fno, Fnc, I, U I
SP2 300...5999 2000
nSP2 300...5999 1800
FSP2 300...5999 2200
ASP 0...5999 0
AEP 0...5999 5999
rATE [Hz] 1...33 15
dS1 0...0.1...5 0
dr1 0...0.1...5 0
dS2 0...0.1...5 0
dr2 0...0.1...5 0
dAP 0...0.1...5 0
dIS d1..3; rd1...3; OFF d3
重復精度/**度
測量頻率 15 Hz 測量值的重復精度 **度
白色(90 %反射) 灰色(18 %反射) 白色(90 %反射) 灰色(18 %反射)
300...1000 mm ± 11 mm ± 13 mm ± 31 mm ± 33 mm
1000...2000 mm ± 28 mm ± 30 mm ± 48 mm ± 50 mm
2000...3000 mm ± 50 mm ± 50 mm ± 70 mm ± 70 mm
3000...4000 mm ± 85 mm ± 85 mm ± 105 mm ± 105 mm
4000...5000 mm ± 105 mm -- ± 125 mm --
5000...6000 mm ± 145 mm -- ± 165 mm --
重復精度/**度
測量頻率 1 Hz 測量值的重復精度 **度
白色(90 %反射) 灰色(18 %反射) 白色(90 %反射) 灰色(18 %反射)
300...1000 mm ± 8 mm ± 10 mm ± 28 mm ± 30 mm
1000...2000 mm ± 25 mm ± 25 mm ± 45 mm ± 45 mm
2000...3000 mm ± 38 mm ± 38 mm ± 58 mm ± 58 mm
3000...4000 mm ± 70 mm ± 70 mm ± 90 mm ± 90 mm
4000...5000 mm ± 100 mm -- ± 120 mm --
5000...6000 mm ± 100 mm -- ± 120 mm --
黑色的檢測距離(6 %反射) <= 2500 mm
數值用于
- 穩定的環境條件: 23 °C / 960 hPa
- 目標物外來光線的值: 100 klx
- 小的啟動時間(分鐘): 10
IFM光電開關，愛福門激光測距傳感器，O1D155
2 Safety instructions
• Please read this document prior to set-up of the unit. Ensure that the product is
suitable for your application without any restrictions.
• Improper or non-intended use may lead to malfunctions of the unit or to unwanted
effects in your application. That is why installation, electrical connection,
set-up, operation and maintenance of the unit must only be carried out by
qualified personnel authorised by the machine operator.
• In case of malfunction of the unit please contact the manufacturer. If the unit is
tampered with and/or modified, any liability and warranty is excluded.
According to the cULus approval
Caution - Use of controls or adjustments or procedures other than those specified
herein may result in hazardous radiation exposure.
3 Functions and features
The unit is used as an optical distance sensor.
3.1 Applications
• The optical distance sensor measures distances between 0.3 and 6 m.
• It has a background suppression at > 6...100 m.
• The measured value is shown in a 10-segment display.
• According to the set output functions 2 output signals can be generated.
The distance between the sensor and the background must be limited
to max. 100 m by the customer. Otherwise the measured value may be
ambiguous. → 5.1 Installation conditions
4 Functions
4.1 Output function hysteresis
The hysteresis keeps the switching state of the output stable if the measured
value varies about the sensing range. Both outputs (OUT1 and OUT2) can be set
as hysteresis function. → 9.2.4 Hysteresis function
4.2 Output function window
The window function enables the monitoring of a defined acceptable range. Both
outputs (OUT1 and OUT2) can be set as window function.
→ 9.2.6 Window function
4.3 Analogue output function
The sensor can also output an analogue signal on output 2 (OUT2) which is
proportional to the distance. → 9.2.11 Scaling of the measuring range (analogue output).
