產品[

威格士比例閥，DG4V-5-6CJ-M-U-H6-20[產品打印頁面]

]資料

威格士比例閥，DG4V-5-6CJ-M-U-H6-20的詳細介紹

威格士比例閥，DG4V-5-6CJ-M-U-H6-20
[ in3/rev] 流量 @額定轉速 RPM l/min (gpm) 額定轉速
rpm 額定壓力 bar [psi] 重量
420 系列泵, 套件 9900194-008 墊片更換程序和安裝資料
殼體壓力 - 無外部泄油管路 - 20 bar [300psi], 用于連續工況
背壓超過 20 bar [300psi] 時, 需使用外
部泄油管路. 安裝泄油管路, 保證馬達殼體內部在工作時充滿油液.
2000 系列盤配流馬達, 內帶交叉超載溢流閥技術手冊 English C-MOLO-TM001-E
A, H, R S, T, W, 2K, 4K, 6K, 10K 工具清單, 扭矩發生器, 3
, 4, 6, & 12 系列轉向控制單元 (轉向控制單元),
110, 230 & 450 系列轉向控制單元, 20 25, 35 & 40 系列轉向控制單元
Char-Lynn 馬達驅動輸入軸辨認, 尺寸和對照參考服務報告 English 1100
產品更新: 可以在伊頓售后服務零件市場通過替換帶
有伊頓和威格士品牌的重新的零件, 對在產品更新程序內的產品完成更新.
NOTE: To find the shaft power to drive a single piston pu
mp or vane pump at 1800 rpm, select the required displacement and operating
pressure, then read across the chart for the kilowatt power input.
To determine the total input power for thru-drive pumps, add the
kilowatts for the front pump and the rear pump together, at the selected
operating pressures. The input kilowatts should not exceed 16 k
W with only one pumping unit in operation, or with two pumping units in
For example: A thru-drive pump with a displacement of 20
cm3/rev will require 8 kW of power at 100 bar (1500 psi).
The second pump with a displacement of 18 cm3/rev
will require 7 kW of power at 100 bar (1500 psi).
With both pumping units operating simultaneously, they require 15 kW of input power.
1. As operating pressure reduces to minimum, flow incr
eases from chart values by approximately 4 to 5% for piston pumps
and 10 to 12% for vane pumps.
2. As the motor pump reaches full load, the motor speed
droop will reduce output flow from chart values by approximately 2%.

產品留言

標題

聯系人

聯系電話

內容

驗證碼