主營產品:閥門、氣動元件、儀器儀表、電子元器件
產品[

供應美國進口威格士葉片馬達,VICKERS馬達技術服務[產品打印頁面]

]資料
如果您對該產品感興趣的話,可以
產品名稱: 供應美國進口威格士葉片馬達,VICKERS馬達技術服務
產品型號: EEA-PAM513A32-EN53
產品展商: 威格士VICKERS
簡單介紹
供應美國進口威格士葉片馬達,VICKERS馬達技術服務 An economical, efficient and compact means of applying variable speed, rotary hydraulic power, these motors have variable horsepower (constant torque) characteristics. They can be stalled 供應美國進口威格士葉片馬達,VICKERS馬達技術服務

供應美國進口威格士葉片馬達,VICKERS馬達技術服務的詳細介紹

供應美國進口威格士葉片馬達,VICKERS馬達技術服務
上海乾拓貿易有限公司
企業QQ:2880626087
電話;021-69001039
手機;17321017802(微信)
郵箱;17321017802@163.com
地址:上海市嘉定區江橋嘉涌路99弄6號713室
Minimum speed can vary between 50
and 100 r/min , depending upon
motor size and characteristics of thedriven load.
An economical, efficient and compact
means of applying variable speed,
rotary hydraulic power, these motors
have variable horsepower (constant
torque) characteristics. They can be stalled
under load without damage when
protected by a relief valve.
Indirect Drive Capability
Rugged two-bearing construction
permits motors to be used in direct or
indirect drive installations. Indirect drive
applications require approval by Vickers
Engineering Department.
These high speed, high pressure
motors offer a choice of 12 torque
ratings from 4,7 to 33,9 Nm/6,9 bar (42
to 300 lb. in./100 psi); speeds from 400
to 3600 r/min continuous and 4000
r/min intermittent; pressures to 155 bar
These motors offer a combination of
low cost, pressures to 138 bar (2000
psi), speeds to 2800 r/min, torques of
2.0, 2.8 or 4.0 Nm/6.9 bar (18, 25 or 35
Minimum speed is normally 100 r/min.
Lower speeds are obtainable,
depending upon torque requirements
and the nature of the load.
Replaceable Cartridge
Rotary motion is developed within the
drive cartridge which consists principally
of a cam ring, rotor, ten vanes, and two
pressure plates. the cartridge is bolted
together so parts can be serviced
separately or as an assembly.
Replaceable cartridges permit motor
overhauls in just 10 minutes. A cartridge
can be replaced without removing the
unit from the machine, and usually
without disconnecting hydraulic lines.
25M - 50M motors are suited to
series applications. Inlet and outlet ports
b. in./100 psi), flange or foot mounting,
and choice of port locations.
M2U motors operate in one direction
only, and rotation must be specified
when ordering. Shaft rotation of
M2-200 motors can be reversed simply
by reversing the direction of flow
through the motor ports.
The motor’s cover can be assembled
in four positions with respect to the
body. Changing port positions is
accomplished by simply rotating the
cover, and the cartridge which is pinned
to the cover, in 90 increments, thus
providing the optimum mounting forconnecting piping.
Two internal inlet chambers are
diametrically opposed as are two outlet
chambers. This construction eliminates
bearing loads resulting from pressure, a
major cause of wear in designs without
this feature.
Installation Flexibility
The motor’s cover can be assembled
in different positions with respect to
the body. To change the relative
location of the ports, it is necessary only
to remove four cover bolts and rotate
the cover to the desired position.
This allows optimum positioning to suit
connecting piping.
High Efficiency
Optimum running clearances and
hydraulic balance assure sustained
high efficiency over the life of the motor.
Inertia of rotating parts is low ... parts
are symmetrical, providing dynamic
balance and freedom from vibration.
A unique dual pressure plate design
results in low internal leakage and
overall operating efficiencies up to
90%. Efficiency varies with motor size,
pressure, speed, and fluid viscosityand temperature.
2250 psi) continuous and 172 bar
(2500 psi) intermittent; reversible shaft
rotation; flange or foot mounting.
Shaft rotation can be reversed simply by
reversing the direction of flow through
the motor ports. When properly
protected by valves, the motor may be
used for rapid cycle reversing or stalled  without damage.
can be pressurized simultaneously
without affecting service life or  operating smoothness.

供應美國進口威格士葉片馬達,VICKERS馬達技術服務

產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!



名稱:上海乾拓貿易有限公司
上海地址:上海市嘉定區嘉涌路99弄6號713室

聯系人:羅丹
QQ:2880626082
直線電話:021-39526590
聯系人: 18917038407(同微信)
郵箱:18917038407@163.com


聯系人;沈雪
企業QQ:2880626081
手機;18918574312(微信) 
電話;021-69000975
郵箱:18918574312@163.com


聯系人:章瑩玲
企業QQ:2880626085
手機;18918572467(微信) 
電話;021-69000973
郵箱:18918572467@163.com


聯系人:王亞波
QQ:2880626088
021-39529839-8012
手機:17321056802(同微信)
郵箱:17321056802@163.com


上海乾拓貿易有限公司    地址:上海嘉定嘉涌路99弄6號713    郵編:
聯系人:?jiǎn)蜗壬?nbsp;   電話:021-69000975   手機號碼:18918574312    傳真:021-39947181
滬ICP備09006758號-2  
 

滬公網安備 31011402005013號

點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息