產品[

美國威格士液壓遠程控制閥產品描述，VICKERS液壓遠程控制閥[產品打印頁面]

]資料

美國威格士液壓遠程控制閥產品描述，VICKERS液壓遠程控制閥的詳細介紹

美國威格士液壓遠程控制閥產品描述，VICKERS液壓遠程控制閥
上海乾拓貿易有限公司
企業QQ:2880626086
手機；17302157802
郵箱:17302157802@163.com
傳真；021-39947181
聯系人：楊艷鳳
上海市嘉定區江橋鎮嘉涌路99弄6號713室
HRCs (hydraulic remote controls) are
available in hand, foot and mechanically
operated versions, designed for pilot
pressure actuation and control of
remotely located directional valves.
They are intended for mobile and
industrial applications in which hydraulic
The 30 design HRCs operate on input
flows up to 16 L/min (4.2 USgpm) and
pressures up to 110 bar (1600 psi) or
150 bar (2175 psi), dependent on the
model and the type of response required
for the application. HRCs require input
pressures equal to the maximum
required output pressures, and
preferably a minimum of 10 bar (145 psi)
higher to 在模型MOST選項。
？時尚的寬范圍人體工程學
設計手驅pilot operation of system components is to
be controlled from one operator station.
On vehicles, the HRCs are typically
installed in seat armrests or a console.
Operation動器可能
包括多個電開關。
？可用行程限制裝置assure fast response. From the
input pressure an HRC creates reduced
output pressures that vary proportionally
with lever or pedal stroke, applying the
pressures to main directional valves
contro生命。
？便于維修。
附加功能和效益
30設計
？控制從大改進的靈敏度
在所有的死lling speed and direction of
hydraulic actuators. Full details are
given in this publication.
Features and Benefits
Low Effort, Precise Control
Very lit？出生的年的可靠性
現場經驗。
？在使用的所有電器元件
多功能操作手柄
測試，以確保長期無故障
區的降低
方向wide variations in pressure. This
control is assured by using an ACX2
supply unit; see opposite page.
Freedom of System Design
Single-station control of widely placed
directional valves readily achieved.
In a vehicle, for example, an HRC is
easily mountable in the cab or
elsewhere because it is compact and
eliminates the cumbersome。
mechanical detents available as
option on most models.
Wide range of stylish ergonomically
designed hand actuators that may
include multiple electrical switches.
Stroke limiting devices available on
Allows ergonomic operator
workstation design to be achieved by
utilizing the low noise, safe oil
temperature, and removing fire
hazards from the workstation. This in
turn leads to a safer, cleaner, and
more operator friendly environment.
Allows main-stage directional valves
to be mounted for optimum piping,
quietness and heat dissipation.
Wide range of output characteristics
allow HRC to be perfectly matched to
the main-stage valve.
Low Noise Level
The use of an HRC allows better
insulation between the cab and
engine because there is no longer a
need of holes through the cab wall for
linkage to the main valve.
Low hysteresis provides highly
controllable and repeatable control of
actuator, and reduces vehicle shock
and subsequent noise.
Enhanced Operator Safety
The HRC needs only a relatively low
working pressure, about 30 bar (435
psi). This lessens the risk to the
operator from any pipe failure.
Dependable, Quality Products
Robust hydro-mechanical design.
most models.
Flexible aluminum valve body design

allows for many special logic features

美國威格士液壓遠程控制閥產品描述，VICKERS液壓遠程控制閥

產品留言

標題

聯系人

聯系電話

內容

驗證碼