主營產品：閥門、氣動元件、儀器儀表、電子元器件
產品[

DGMDC-5-X-TK-30/VICKERS多路閥[產品打印頁面]

]資料
如果您對該產品感興趣的話,可以
產品名稱: DGMDC-5-X-TK-30/VICKERS多路閥
產品型號: DGMDC-5-X-TK-30
產品展商: 威格士VICKERS
簡單介紹
DGMDC-5-X-TK-30/VICKERS多路閥 Pump sizing is important to assure adequate power for under all operating conditions. The required pump flow can calculated by the following equation.

DGMDC-5-X-TK-30/VICKERS多路閥的詳細介紹

DGMDC-5-X-TK-30/VICKERS多路閥
Force required for the axle.
Kingpin torque as determined in Step 1.
The value calculated in Step 1 is the total torque for the
axle. If the steered axle is power driven, double this value
to approximate the additional dynamic loads.
Effective radius arm about the kingpin axis at which
the cylinder force is applied. The effective radius is the
minimum distance from kingpin to the axis of the cylinder
… not the actual length of the arm.
The 13-tooth gears, versus 10 teeth in previous pumps,
minimizes the flow ripple. This reduces noise as well as
The improved trap reliefs not only increase power, they also
For vehicle with a steered axle that can never be overloaded
use 80% of the steering circuit relief valve setting. For manually
set area is determined, the cylinder diameter can be calculated.
D = Inside diameter of cylinder.
d = Rod diameter as required.
The cylinder stroke is determined by axle geometry. That is, the
required stroke is a function of the radius arm and the total angle
through which the arm turns.
help keep oil flowing smoothly to reduce noise.
Improved bearing lubrication system uses inlet oil instead
high pressure oil, improving volumetric efficiency for more
The super polished shaft and gears improve mechanical
efficiency and reduce wear on these components, adding
the service life and reliability of the pump.
The optimized trapped oil relief areas help reduce pressure
ripple for quieter operation. This also decreases the input
The innovative new wear plate permits simple field
reversibility of the pump direction. Simply open the pump,
switch the drive gear and idler gear, reposition the plug and
reassemble. No extra parts are needed.
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!



名稱：上海乾拓貿易有限公司
上海地址：上海市嘉定區嘉涌路99弄6號713室

聯系人：羅丹
QQ：2880626082
直線電話：021-39526590
聯系人： 18917038407（同微信）
郵箱：18917038407@163.com


聯系人;沈雪
企業QQ:2880626081
手機；18918574312（微信） 
電話；021-69000975
郵箱:18918574312@163.com


聯系人：章瑩玲
企業QQ:2880626085
手機；18918572467（微信） 
電話；021-69000973
郵箱:18918572467@163.com


聯系人：王亞波
QQ:2880626088
021-39529839-8012
手機：17321056802（同微信）
郵箱:17321056802@163.com


上海乾拓貿易有限公司    地址：上海嘉定嘉涌路99弄6號713    郵編：
聯系人：單先生    電話：021-69000975   手機號碼：18918574312    傳真：021-39947181
滬ICP備09006758號-2  
 

滬公網安備 31011402005013號
點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息