如果您對該產品感興趣的話,可以
產品名稱:
VF3230-5DZB-02/SMC微霧分離器
產品型號:
VF3230-5DZB-02
產品展商:
SMC
簡單介紹
VF3230-5DZB-02/SMC微霧分離器
between the inlet and the outlet exceeds 0.1
MPa, it can cause damage to the product.
Do not install the product in a place where it
can be affected by a pulsation (including
VF3230-5DZB-02/SMC微霧分離器的詳細介紹
VF3230-5DZB-02/SMC微霧分離器
Use caution regarding the particles that may
be emitted from the outlet side of a
pneumatic equipment.
Installation of a pneumatic equipment on the outlet side can
deteriorate the cleanliness because a particle will be
generated from the equipment.
The mounting position of the pneumatic equipment needs to
Set the air flow capacity with an initial
pressure drop of 0.03 MPa or less. If the
The material of the element is polycarbonate.
The material is resistant to wiping with alcohol, but is not
suitable for atmospheres or places with organic solvents,
chemicals, cutting oils, synthetic oils, ester base compressor
oils, alkalis or thread locking agents.
If the pressure difference (pressure drop)
surge pressure) of over 0.1 MPa.
initial pressure drop is set to be high, its
service life will be shorten due to clogging.
Determine the product by the maximum
consumption flow rate.
When using compressed air for an air blow application,
calculate the maximum volume of air that will be consumed
before selecting the SFD series product size.
Generally, the following pollutant particles
are contained in compressed air.
[Pollutant particle substances contained in th
?Dusts and particles which are in the surrounding air
