產品[

DG4V-3-6C3-VM-U-HH7-60/威格士疊加式單向閥[產品打印頁面]

]資料

DG4V-3-6C3-VM-U-HH7-60/威格士疊加式單向閥的詳細介紹

DG4V-3-6C3-VM-U-HH7-60/威格士疊加式單向閥

This manual provides service information for Eaton
Models 70360 variable displacement piston pumps. Step
by step instructions for the complete disassembly,
inspection, and reassembly of the pump are given. The
following recommendations should be followed to insure successful repairs.
Remove the pump from the application.
Cleanliness is extremely important.
Clean the port areas thoroughly before disconnecting the hydraulic lines.
Plug the pump ports and cover the open hydraulic lines immediately after they're disconnected.
Drain the oil and clean the exterior of the pump before making repairs.
Wash all metal parts in clean solvent.
Use compressed air to dry the parts. Do not wipe them dry with paper towels or cloth.
Compressed air should be filtered and moisture free.
Always use new seals when reassembling hydraulic pumps.
Lubricate the new rubber seals with a petroleum jelly (Vaseline? before installation.
Torque all bolts over gasketed joints, then repeat
the torquing sequence to makeup for gasket
c. misadjusted, damaged or broken neutral return spring
Inspect Servo Control Valve for: (if used)
a. proper inlet pressure
b. misadjusted, damaged or broken neutral return spring
c. galled or stuck control spool
d. galled or stuck servo piston
Inspect System Relief Valves for:
a. obstructed air flow (air cooled)
b. obstructed water flow (water cooled)
c. improper plumbing (inlet to outlet)
c. poppet valve held off seat
12 Inspect Motor for:

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!