產品[

EVS7-6-FG-D-3CV0_日本SMC方向控制閥[產品打印頁面]

]資料

EVS7-6-FG-D-3CV0_日本SMC方向控制閥的詳細介紹

EVS7-6-FG-D-3CV0_日本SMC方向控制閥
Please note that the following are general features and subject
to change depending on processing conditions. For details,
please contact sealing component manufacturerers.
With low outgassing, low permanent-setting and low gas permeation
rates, this is the most popular seal material for high vacuums.
Standard material used by SMC’s high vacuum angle valve is
Mitsubishi Cable Industries, Ltd. (Compound No. 1349-80).
It is advisable to choose a model depending on its application,
because an improved material compound (3310-75) which reduces
the weight reduction ratio with O2 plasma is also available.
當壓力施加到控制口S，該閥S被刪除
從閥S裝配和打開，直到調整后的開
主排氣門的開Ç （閥M ）
當壓力施加到控制口M，閥門M被除去
從身體座面和完全打開。
初的排氣閥，主排氣閥訴閉幕
由來自先導端口S和M ，兩個閥除去壓力

Kalrez® ∗ Kalrez® is a registered trademark DuPont Performance Elastomers.
This material, perfluoroelastomer (FFKM), has excellent heat and
chemical resistance, but its permanent-setting is large, and special
caution is required. Variations are available with improved
plasma (O2, CF4) and particulate resistance; therefore it is advisable
to select types based upon the application.
Compound No. 4079: Standard Kalrez®, excellent in gas and heat
Chemraz® ∗ Chemraz® is a registered trademark of Greene, Tweed & Co.
This material, perfluoroelastomer (FFKM), has excellent chemical
初的排氣率應術前進行調整（帶導頻
s在一個非加壓狀態的端口）。
初的排氣速度是通過轉動調節螺母設置為零
順時針旋轉，直到它只是停止。（不要使用工具。）
初的排氣速度是通過轉動逆時針螺母調整。

調整螺母的數目（其間距為1毫米）的旋轉和初始
x的開盤價初的排氣閥（閥S ）
and plasma resistance and has slightly higher heat resistance
than FKM. Several variations of Chemraz® are available and it is
advisable to choose based upon the particular plasma being
Excellent physical properties and especially
effective for moving parts.
Applicable to both fixed and moving
parts and compatible with a wide variety
The cleanest material among Chemraz®,
developed for high-density plasma instruments.

EVS7-6-FG-D-3CV0_日本SMC方向控制閥

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!