MRHQ15D-180S-N-F9NL_原裝日本SMC氣缸[產品打印頁面]

MRHQ15D-180S-N-F9NL_原裝日本SMC氣缸
 Absolute filtration accuracy: 0.2, 0.4 レm
 Water, alkali, or alcohol bases
Standard Element Selection Guide
Specifications: Select desired temperature
conditions and filtration accuracy from the
"Standard Element Selection Guide" on the
b To extract the element from the case, rotate
the case counterclockwise about 20
degrees until it stops, then lower it by
about 40 mm and remove it from the cover.
端鎖型(未改款) CBA2  單桿雙作用
氣液型氣缸(未改款) CA2□H  單桿雙作用
CA2W□H  雙桿雙作用
特長 方形端蓋、采用拉桿型標準，故重量比CA1系列減輕15%。

帶磁性開關(CDA2系列：CDA2、CDA2W、
CDA2K、CDA2KW、CDA2□Q、CDBA2、CDA2□H、CDA2W□H)
c Align the indentations of the case with the
projections of the cover, lift the case upward
by about 10 mm and rotate it clockwise
vMount it in such a way that the entire flanged
perimeter of the cover and case are
held by the retainer of the V-band.
bSet the stopper on the retainer while holding
down the V-band outside perimeter,
※氣液型只有φ125、φ140、φ160。  形式 系列/CAD 動作方式 缸徑 (mm)
低摩擦形 CS1□Q  單桿雙作用 125,140,160
特長 方形端蓋，大直徑拉桿型氣缸。
帶磁性開關(CDS1系列：CDS1、CDS1W、CDS1□Q)

and then tighten the wing bolt to the prescribed
mWhen air release is completed, tighten the
l250 elements are used,
do not discard the intermediate holder
and lower element holder attached under
the element, since they are reused.
n Clean the inside of the case, gaskets, seals,
holders, plugs, etc., with a pure fluid or solvent.
Verify the recommended flow rate of the selected
element with the "Standard Element
Find a value for the formula, Necessary flow
rate ± Recommended flow rate, rounding up
to the nearest whole number. The value obtained
is the number of necessary elements
Select a housing type to hold the elements

MRHQ15D-180S-N-F9NL_原裝日本SMC氣缸

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!