產品[

經銷SMC真空無桿氣缸,MY1B16G-200[產品打印頁面]

]資料

經銷SMC真空無桿氣缸,MY1B16G-200的詳細介紹

經銷SMC真空無桿氣缸,MY1B16G-200
氣缸轉移在真空環境（1.3×10-4帕）
簡化和減少大小
顆粒的產生從線性
This data indicates deterioration with age of
he average number of particles per operation under the following test conditions.
<Test conditions> All the external parts (made of
aluminum alloy) such as the body
and slide table are electroless
nickel plated.
Furthermore, external magnets are
coated with titanium nitride.
Note 1) Please consult with SMC if other
specifications for surf
• Cylinder: CYV32-100 Workpiece mass: 5 kg
• Average speed: 100 mm/s
• Measurement environment: Operation in the
atmosphere afterbaking at 150°C for 48 hours.
Note2) This data is considered typical but not guaranteed.
Note 3) A particulate generation test has been conducted
引導單元已經減少與使用
不銹鋼直線導軌和低的
微粒產生真空潤滑脂。
低微粒產生速度[mm /秒]
速度和沖擊加速度的關系
沖擊加速度[ M/S2 ]There is no particulate generation
due to friction, since the construction
does not allow contact between the
cylinder tube’s exterior surface
50 100 150 200 250 300
When using in vertical operation, prevention of
workpiece dropping due to breaking of the
magnetic coupling should be considered. The
allowable load mass and maximum operating
pressure •平均時速：100毫米/秒
•測量環境：操作在大氣中
在150℃下afterbaking 48小時。
注2 ）該數據被認為是典型，但不能保證。
注3）顆粒的產生測試已經在開展
由于氣缸可以在真空內進行安裝
腔室，它有利于簡化和減少了
一個傳送系統的大小。
A special cylinder tube using extruded aluminum material is employed.
No deflection or contact occurs even
for long strokes, since the cylinder is
rigidly attached to the base and the
slide table is independently supported
經銷SMC真空無桿氣缸,MY1B16G-200

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!