主營產品：閥門、氣動元件、儀器儀表、電子元器件
產品[

MY1B32G-700H7-Y59A，日本SMC無桿氣缸[產品打印頁面]

]資料
如果您對該產品感興趣的話,可以
產品名稱: MY1B32G-700H7-Y59A，日本SMC無桿氣缸
產品型號: -
產品展商: SMC
簡單介紹
MY1B32G-700H7-Y59A，日本SMC無桿氣缸 accelerated. The stiffening ribs, etc. should touch lightly, while staying within the pad skirt’s deformation range. Positioning should be

MY1B32G-700H7-Y59A，日本SMC無桿氣缸的詳細介紹

MY1B32G-700H7-Y59A，日本SMC無桿氣缸
depending upon the operating environment.
An appropriate pad material should be selected.
Furthermore, since vacuum pads are manufactured for use with
industrial products, they should not come into direct contact with
medicines or food products, etc.
2. Depending upon the weight and shape of the
workpieces, the diameter, quantity and shape of
pads suitable for use will vary.
Use the pad lifting force table for reference.
Also, the pads to be selected will differ based upon conditions other
than the above, such as the condition of the workpiece surface
(presence or absence of oil or water), the workpiece material and its
gas permeability. Confirmation is necessary by actually performing
vacuum adsorption on the subject workpieces.
3. Use a buffer for adsorption on fragile workpieces.
The cushioning performed by the buffer is also necessary when there is
variation in the height of workpieces. When it is desired to perform
further positioning of pads and workpieces, a detent buffer can be
4. The life of the buffer will be reduced if lateral force
is applied to the buffer shaft.
Note that sometimes a load is applied to the buffer by a piping tube
(pulling or pressing, etc. in a lateral direction).
5. Do not apply an impact or large force to a pad when
This will cause deformation, cracking and wear of the pad to be
6. When transporting in an upward direction, factors
such as acceleration, wind pressure and impact
force must be considered in addition to the
Use caution particularly when lifting items such as glass plates
and circuit boards, because a large force will be applied by wind
pressure. When a workpiece which is oriented vertically is
transported horizontally, large forces are applied by acceleration
when movement is started and stopped. Further, in cases where
the pad and workpiece can slip easily, accelerations and
decelerations of horizontal movement should be kept low.
7. When transporting flat shaped workpieces that have large
surface areas using multiple pads, care must be taken in
MY1B32G-700H7-Y59A，日本SMC無桿氣缸
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!



名稱：上海乾拓貿易有限公司
上海地址：上海市嘉定區嘉涌路99弄6號713室

聯系人：羅丹
QQ：2880626082
直線電話：021-39526590
聯系人： 18917038407（同微信）
郵箱：18917038407@163.com


聯系人;沈雪
企業QQ:2880626081
手機；18918574312（微信） 
電話；021-69000975
郵箱:18918574312@163.com


聯系人：章瑩玲
企業QQ:2880626085
手機；18918572467（微信） 
電話；021-69000973
郵箱:18918572467@163.com


聯系人：王亞波
QQ:2880626088
021-39529839-8012
手機：17321056802（同微信）
郵箱:17321056802@163.com


上海乾拓貿易有限公司    地址：上海嘉定嘉涌路99弄6號713    郵編：
聯系人：單先生    電話：021-69000975   手機號碼：18918574312    傳真：021-39947181
滬ICP備09006758號-2  
 

滬公網安備 31011402005013號
點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息