2401106.4660.024.00 ,HERION不銹鋼電磁閥[產品打印頁面]

]資料

2401106.4660.024.00 ,HERION不銹鋼電磁閥的詳細介紹

2401106.4660.024.00 ,HERION不銹鋼電磁閥
工作壓力電磁閥：取決于電磁閥
評級。不得超過17巴（250 psig）的。
壓力先導式：17巴（250 psig）的值。
小工作壓力：3巴（44 psig）的
工作溫度電磁操作：取決于電磁閥
評級。必須在范圍-20°C至+80°C（0°F到+175°F）。
G1/4 with ISO G and ISO Rc main ports
1/4 PTF with PTF main ports
G1 with ISO G and ISO Rc main ports
1" PTF with PTF main ports
Typical flow with 6,3 bar (90 psig) inlet pressure and pressure
drop of 0,5 bar (7 psig):
147 dm3/s (P1 to P2 = Cv 11,2) (P2 to P3 = Cv >11)
Snap pressure: Full flow when downstream pressure reaches
50 – 80% of inlet pressure
Charge time for 25 litre downstream volume and 6,3 bar (90 psig)
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
to consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
2401106.4660.024.00 ,HERION不銹鋼電磁閥

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!