NORGREN可自動調節減壓閥，11-808-960[產品打印頁面]

]資料

NORGREN可自動調節減壓閥，11-808-960的詳細介紹

NORGREN可自動調節減壓閥，11-808-960

特點
能夠安裝在氣動系統的任意位置–可以安裝在便利的位置
可與普通型和反饋型先導減壓閥配合使用
反饋型先導減壓閥對下游壓力變化很感，可自動調節先導減壓閥的出口壓力

介質: 壓縮空氣
接口尺寸: G3/4
工作壓力: 20.0 bar
工作溫度: -20.0 ... 80.0 °C
溢流/非溢流: 溢流
壓力表: Without
壓力表接口: Rc1/8
流量: 180 dm3/s
熱塑彈性體: 丁腈橡膠
主體: 壓鑄鋅
閥蓋: 鋁合金
出口壓力調節: 20.0 bar

NORGREN可自動調節減壓閥，11-808-960

Can be installed at any point in the compressed air system without regard to accessibility. The pilot regulator can be installed in the most Convenient location
Accurate pressure regulation over a wide range of flows
Relieving units
Can be used with conventional or feedback pilot regulator
Regulator and pilots are constant bleed for fast response

Technical Data
Fluid: Compressed air only (pilot and pilot operated regulators
have constant bleed)
Maximum pressure: 20 bar (290 psig)
Operating temperature: -20° to +80°C (-4° to +175°F)
Air supply must be dry enough to avoid ice formation at temperatures
below +2°C (+35°F).
Approximate flow (conventional pilot) with 8 bar (120 psig) inlet
pressure, 6,3 bar (90 psig) outlet pressure and pressure
droop of 1 bar (15 psig) from set:
160 dm3/s (340 scfm)
Approximate flow (feedback pilot) with 8 bar (120 psig) inlet
pressure, 6,3 bar (90 psig) outlet pressure and zero
pressure droop:
180 dm3/s (380 scfm)
Gauge ports: Rc 1/8
Pilot port: Rc 1/4
Pilot Regulators
Conventional:
11 400/20AL-X
Feedback:
11-204 high flow applications and remote sensing. Can only
be used in conjunction with a pilot operated regulator.
Materials:
Pilot operated regulators:
Body: Zinc
Bonnet: Aluminium
Valve: Brass
Elastomeric materials: Nitrile
Pilot regulators:
Body: Zinc
Bonnet: Zinc
Handwheel: Acetal resin
Valve: Brass
Elastomeric materials: Nitrile