產品[

NORGREN電磁閥，8212402.8001.024.00[產品打印頁面]

]資料

NORGREN電磁閥，8212402.8001.024.00的詳細介紹

NORGREN電磁閥，8212402.8001.024.00
EXCELON設計允許在線或模塊化
按壓鎖定調節旋鈕與防篡改
有助于保護氣動設備免受過
通過延遲壓力過大的壓力積聚
模塊化的安裝與EXCELON 72 ， 73 ，和74
系列可制成以適應特定的應用
工作溫度：
透明碗： -20 °至50°C （ 0 °到125 °F ）
金屬碗： -20 °至65°C （ 0 °到150 °F ）
空氣供應必須足夠干燥，以避免在溫度低于+2°C冰的形成
（ +35 °F ）。
粒子去除：下到0,01微米
空氣質量：在ISO 8573-1 ，第1類（顆粒）和Class 2
在出口空氣的殘留油分含量： 0.01 ppm在20 °C
（ 70 °F）用17 ppm的入口濃度
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and temperatures
can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
water condensation could have a detrimental effect on the application.
6,3酒吧（ 90 psig）的進口壓力保持規定的油流量
去除性能：
F74C ： 16立方分米/秒（ 33.9 SCFM ）
F74H ： 28立方分米/秒（ 59.3 SCFM ）
手動排水連接：1 /8“
自動排水連接： 1/8“
金屬：鋁
金屬碗液位指示器鏡頭：
透明尼龍
元素：合成纖維和聚氨酯
泡沫
橡膠：氯丁橡膠和丁腈
服務指標：
身體：透明尼龍
內部部分：乙縮醛
彈簧：不銹鋼
彈性體：丁腈橡膠
訂購信息
請參閱下面的訂購信息

產品留言

標題

聯系人

聯系電話

內容

驗證碼