SMC槳葉式流量開關，IF311-10-00[產品打印頁面]

SMC槳葉式流量開關，IF311-10-00

電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
Q：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn

槳葉式流量開關   IF3
系列/CAD 設定流量范圍 (L/min)
IF3  14～60 20～1500 36～2600
特長 用于冷卻設備等的通用斷水、減水型繼電器。
接管口徑　3/4, 1
相當IP42、相當IP44。

慎重
1。將交換機安裝在水平管道的頂部，所以流體流動
中的箭頭指示的方向。
密封的深度應該是93/4B±1毫米和11毫米±
1.2毫米1B。
2。只允許安裝垂直安裝方向
水平管。
3。提供的直管部相對應的
約5倍的管的孔中之前和之后的
該產品安裝管道上的面積，從而保持
產品盡可能遠的元素
擾亂流量，如彎頭或閥門。
4。三種類型的船槳，短期，中期和長期，
每個模型。根據管道尺寸，使用其中之一
和設定的流速。
5。當安裝槳IF3 O型，管道可能是
干擾的槳**。
因?yàn)檫@是用于檢測小流量，以縮小
之間的距離，擋板和管道，附加
槳**的加工可能是必要的，以消除
兩者之間的干擾。
6。使用符合JIS規格的管件。
對于11/4B3B，使用市售工會三通
不同的直徑。
4B，6B，使用1B插座已經減少了一半，
焊接。
7。當使用非標準的管道，管道可能會干擾
槳。當發生這種情況，請機
槳。
8。它不能被使用時，水錘或脈動壓力
被施加到所述流體。
Caution
1. Mount the switch on top of horizontal pipe so that fluid flow is
in the direction of the arrow.
Sealing depth should be 9 mm ± 1 mm for 3/4B and 11 mm ±
1.2 mm for 1B.
2. Mounting orientation is only allowed to install it perpendicularly
to the horizontal pipe.
3. Provide a straight pipe portion that corresponds to
approximately 5 times the bore of the pipe before and after the
area of the pipe on which the product is installed, thus keeping
the product as far away as possible from the elements that
disturb the flow, such as elbows or valves.
4. Three types of paddles, short, medium, and long, are provided
with each model. Use one of them according to the pipe size
and the set flow rate.
5. When installing a paddle on IF3∗O type, piping may be
interfered with by the tip of a paddle.
Because this is used to detect a small flow rate, and to narrow
the distance between a paddle and piping, additional
machining of the paddle tip may be necessary to eliminate
interference between the two.
6. Use pipe fittings that comply with JIS specifications.
For 11/4B to 3B, use commercially available union tees of
different diameters.
For 4B to 6B, use a 1B socket that has been cut in half and
welded.
7. When using piping which is non-standard, piping may interfere
with the paddle. When this happens, please machine the
paddle accordingly.
8. It cannot be used when a water hammer or pulsation pressure
is applied to the fluid.

SMC槳葉式流量開關，IF311-10-00

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!