易福門分體式流量傳感器[產品打印頁面]

易福門分體式流量傳感器，SF5350

分體式流量傳感器
用于適配器
電纜
系統接口: 用于適配器的內螺紋M18 x 1.5
 使用范圍
應用范圍   液體和氣體介質
介質溫度 液體介質 [°C]  -25...80
介質溫度 氣體介質 [°C]  -25...80
 電氣數據
連接控制顯示器   VS3000
 測量/設定范圍
液體介質 
設定范圍 [cm/s]  3...300 
靈敏度時的測量范圍 [cm/s]  3...60 
氣體介質 
設定范圍 [cm/s]  200...3000 
靈敏度時的測量范圍 [cm/s]  200...800 
 精度/偏差
介質溫度梯度值 [K/min]  300
 反應時間
反應時間 [s]  1...10
 環境條件
抗壓強度 [bar]  300
外殼防護等級   IP 67
 認證/測試
抗沖擊   DIN IEC 68-2-27: 40 g (11 ms)  
 
抗震   DIN IEC 68-2-6: 10 g (55...2000 Hz)  
 
MTTF [年]  8213
 機械技術數據
系統接口   用于適配器的內螺紋M18 x 1.5
材料(潮濕部件)   不銹鋼 (316S12); O形環: FPM 8 x 1.5 gr 80° Shore A
外殼材料   不銹鋼 (316S12)
探桿長度 L [mm]  45
重量 [kg]  0.401
 電氣連接
接口   PUR電纜 / 6 m; 5 x 0.34 mm2
的導線長度 [m]  100 (5 x 0.5mm2)

易福門分體式流量傳感器，SF5350

Function and features
In conjunction with the VS3000 control monitor the flow sensor monitors flows in
liquids and gases.
The sensor / control monitor combination senses whether a preset flow value has
been reached (= medium flowing) or not (= medium not flowing) and provides a
switched signal.
Installation
The unit is adaptable for various process fittings (adapters to be ordered separately
as accessories).
? In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).
When the unit is to be mounted at the bottom of the pipe, it should be free from
deposits.
When the unit is to be mounted at the top of the pipe, it should be completely
filled with the medium to be monitored.
? In the case of vertical pipes mount the unit in a place where the medium flows
upwards (fig. 2).
Components integrated in the pipes, bends, valves, reductions, etc. lead to turbulence
of the medium. This affects the function of the unit.
Recommendation: Adhere to the distances between sensor and sources of
interference:
D = pipe diameter; S = sources of interference
4: thread M18 x 1.5
1. Lubricate the nut (3) and all threads with grease to ensure the nut can be
loosened and tightened several times.
Note: No grease must be applied to the sensor tip (A).
2. Screw the suitable adapter (2) onto the process fitting (1).
3. Insert the flow sensor into the adapter and tighten the nut (3); (max. tightening
torque 50 Nm).
Insertion depth of the sensor: min. 12 mm in the pipe. When the adapters are
used which are available as accessories the correct depth is ensured.
Note: The sensor tip must not touch the pipe wall.

易福門分體式流量傳感器，SF5350

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!