德國易福門過程傳感器，PN7300[產品打印頁面]

德國易福門過程傳感器，PN7300

電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
公司網站：www.clientrainmaker.com

電子壓力傳感器
接插件
系統接口: 7/16-20 UNF (SAE)
功能可選
2個輸出
OUT1 = 開關量輸出
OUT2 = 開關量輸出或診斷輸出
4 位數字?jǐn)?shù)碼管顯示
測量范圍: 0...400 bar / 0...5800 psi / 0...40 MPa
 使用范圍
應用范圍   壓力: 相對壓力
液體和氣體
當介質是氣體，壓力> 25 bar時，請事先與制造商ifm聯系。
抗壓強度   600 bar 8700 psi 60 MPa
爆破壓力(低)   1000 bar 14500 psi 100 MPa
介質溫度 [°C]  -25...80
 電氣數據
電氣設計   DC PNP/NPN
工作電壓 [V]  18...36 DC ¹)
電流損耗 [mA]  < 50
絕緣電阻 [M?]  > 100 (500 V DC)
防護等級   III
反相保護   是
過壓保護 [V]  至40 V

德國易福門過程傳感器，PN7300

 1 Preliminary note
1.1 Symbols used
? Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→ Cross-reference
Important note:
Non-compliance can result in malfunctions or interference.
2 Safety instructions
• Please read this document prior to set-up of the unit. Ensure that the product is
suitable for your application without any restrictions.
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property can occur.
• Check the compatibility of the product materials (→ chapter 12 Technical data)
with the media to be measured in all applications.
• Use in gases at pressures > 363 PSI (25 bar) only after contacting the manufacturer
3 Functions and features
The unit monitors the system pressure of machines and plants.
Applications
Type of pressure: relative pressure
Order no. Measuring range Permissible
overpressure Bursting pressure
PSI bar PSI bar PSI bar
PN7300 0...5 800 0...400 8 700 600 14 500 1 000
PN7302 0...1 450 0...100 4 350 300 9 400 650
PN7303 0...363 0...25 2 175 150 5 075 350
PN7304 -14,5...145 -1...10 1 087 75 2 175 150
MPa = bar ÷ 10 / kPa = bar × 100
Avoid static and dynamic overpressure exceeding the given overload
pressure by taking appropriate measures.
The indicated bursting pressure must not be exceeded.
Even if the bursting pressure is exceeded only for a short time, the unit
may be destroyed. NOTE: Risk of injury!
Use in gases at pressures > 363 PSI (25 bar) only after contacting the
manufacturer ifm.
High-pressure units (400 bar) are supplied with an integrated damping device to
avoid any risk of injury in case of bursting when bursting pressure is exceeded.
• When the damping device is removed the damping device can become unusable.
If you have any questions, please contact ifm electronic’s sales specialists.

德國易福門過程傳感器，PN7300

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!